Fortunately there are many ways you can attempt to fix this problem yourself. Here are a few things to try. Lint or other debris may be trapped in the headphone connector. Use a flashlight to check. If you find something may be lodged in the headphone jack, here are some things you can try to clear it out:.

Hopefully the advice above has cleared your problem with no sound on the iPhone or iPad. I took the otter box off and headphone was in wrong position. MY iPhone 6 is acting up. I can hear an incoming call but when I pick up the call the caller can not hear me though I can hear them.

Bring back the headphone jack: Why USB-C audio still doesn't work | PCWorld

Please help me solve this. After some investigation I found that some how my iphone 4 got set to do not disturb and there was a moon in the status bar. Very hard to see the moon. Thanks for the tip. Inserting and removing a headphone plug several times did the trick in my iPad.

So I have a iPad Air. And the sound was acting weird ever since I got it fixed. It worked perfectly fine when it had the cracked screen. So when I try to turn the value up I need to hold down the sound button for two minutes then when I move it to a different position it mutes.

No Speaker Sound - Headphones Work Fine

So what recently happened is I had my beats in and I took theme out to realize my sound dose not work. What if, your headphones break and their in your iPad. So a part of the headphones are actually in the iPad. Switch to a Bluetooth speaker device and get sound then switch back. This worked straight away. I did as Apple suggested, restarted my iPad, and it worked beautifully. Thanks for posting the link! Victoria, I would turn your phone off and place it in front of a fan overnight.

Headphone Jack

If it dries out, it should work fine. This tackiness is key to removing the broken piece in this scenario. Using a cocktail stick or some other narrow applicator, place a tiny blob of superglue on the remaining end of the earphone plug. Wait as per the packet instructions for it to become tacky, then slide into the socket.

After pushing down for 30 seconds or so, pull. While small amounts of glue should be used to avoid leaving residue within the socket, this can be removed. Simply apply a little rubbing alcohol to a Q-tip and swiftly clean inside the socket. If you want a simpler approach, a thumbtack or drawing pin can be used. This requires that the point has a slight bend in it, so you might need to grab a hammer and apply a few swift blows.

With your device in one hand, take the thumbtack and push it into the earphone socket. Do this so that the point of the thumbtack touches the plastic part of the connector, then simultaneously push firmly and twist. The bent point should burrow slightly into the plug. Try a toothpick; plastic or wooden, either is fine. Just make sure it is narrow and long enough to reach into the socket and connect with the lost chunk of your earphone plug. Then, tab a tiny amount of hot glue onto the end, and wait a moment for it to cool slightly. Carefully insert into the earphone socket, and make contact with the debris.

Wait for the glue to cool and dry, then remove. If all has gone according to plan, the missing piece will be removed! No glue to hand? Heat is a good substitute, as the broken part of the connector is almost always accompanied by ring of plastic. To grab hold of this, take a paperclip, and unwind it slightly, perhaps by bending the main length out by 90 degrees.

Next, hold the paperclip with something heatproof, and heat the end of the bent piece. With your phone in your other hand, insert the heated paper clip carefully into the socket, straight down the middle. Push firmly, and wait a few minutes for the plastic to cool. If all has gone well, you should soon be able to remove the broken piece of the earphone connector. GripStick is the result of a successful Kickstarter campaign, designed specifically for the task of removing broken off earphone plugs.

Similarly, if your phone is under warranty or smartphone insurance Should You Buy Smartphone Insurance? Should You Buy Smartphone Insurance? What does smartphone insurance cover?

What does it cost? And after all is said and done, is it worth it? Read More , it might be inconvenient to send it away for repairs it usually is. Buying a GripStick will avoid this being an issue. Use of the GripStick is simple. Slide the cylinder into the earphone socket, push it into place, and pull it out again using the ring. The lost piece will be held by the GripStick, and your earphone jack free to use once again! Play some audio; if the device speaker is still working, then you can consider another solution.

No audio? This is because the broken plug is telling your device that it is plugged in.

Headphone jack not working? Here are 5 possible fixes

As far as your phone or tablet is concerned, it is sending audio to your earphones. It might be inconvenient, and it may require you to rethink your audio options, but switching to Bluetooth is the best way to avoid broken earphone connectors in the future. This has a dual risk: the plug may break, but it might also damage the socket.

This can happen with standard use if the connector is cheaply manufactured, and the end result is frustration and disappointment. While you might use one of the fixes above, buying Bluetooth earphones is the best option.